§ 27-413. Residential multifamily medium density (RM-3).

A.

Purpose. To provide for medium density attached homes, including multiunit residential buildings in areas where such development already exists or is planned for the future. The RM-3 zoning district is appropriate in urban areas within the residential attached, mixed use residential, mixed use employment, commercial neighborhood, and general commercial land use categories of the master land use plan.

B.

Land uses. Permitted, conditional and accessory land uses in the RM-3 zoning district are identified on the land use matrix, article 27-400, appendix A. Specific land uses not identified on the matrix are subject to classification pursuant to section 27-336. With the exception of multifamily developments, no more than one (1) principal structure may be erected on each defined lot.

C.

Area and bulk regulations.

Density/ Min. Lot Size	Min. Lot Width at Bldg. Line	Max Lot Coverage	Minimum Street Frontage	Max Height
20 du per acre/6,500 s.f.	60 feet	65%	20 feet	40 feet (See 27-404(D))

 

Setbacks
Front	Side	Street Side/Corner	Side/Rear (Adjacent to RS dist/development)	Rear
25 feet	7.5 feet	15 feet	30 feet	10 feet

 

1.

Minimum building separation shall be ten (10) feet.

D.

Multifamily developments shall conform to design guidelines of article 27-600 et seq.

(Ord. No. 16-12, § 2, 2-21-12)