§ 27-414. Residential multifamily high density (RM-4).

A.

Purpose. To provide high density attached homes, including multistory residential buildings in those areas where such building types already exist or where such buildings would be consistent with an area's established development pattern and character. RM-4 zoning is appropriate in urban areas in the residential attached, mixed use residential, mixed use employment, commercial neighborhood, and general commercial categories of the master land use plan.

B.

Land uses. Permitted, conditional and accessory land uses in the RM-4 zoning district are identified on the land use matrix, article 27-400, appendix A. Specific land uses not identified on the matrix are subject to classification pursuant to section 27-336. With the exception of multifamily developments, no more than one (1) principal structure may be erected on each defined lot.

C.

Area and bulk regulations.

Density/ Min. Lot Size	Min. Lot Width at Bldg. Line	Max Lot Coverage	Minimum Street Frontage	Max Height
30 du per acre/5,000 s.f.	50 feet	70%	20 feet	40 feet (See 27-404(D))

 

Setbacks
Front	Side	Street Side/Corner	Side/Rear Adjacent to RS Dist/Development	Rear
20 feet	5 feet	15 feet	40 feet	5 feet

 

1.

Minimum building separation shall be ten (10) feet.

D.

Multifamily developments shall conform to design guidelines of article 27-600 et seq.

(Ord. No. 16-12, § 2, 2-21-12)