§ 27-412. Residential multifamily low density (RM-2).

A.

Purpose. To provide low-to-medium density detached and attached single-family homes and duplexes in areas characterized by similar development. The RM-2 zone is appropriate for suburban areas within the residential attached, commercial neighborhood, general commercial, mixed use residential, and mixed use employment classification of the master land use plan, and may serve as a transition or buffer zone between single-family development and higher density multifamily or commercial land uses.

B.

Land uses. Permitted, conditional and accessory uses in the RM-2 zoning district are identified on the land use matrix, article 27-400, appendix A. Specific land uses not identified on the matrix are subject to classification pursuant to section 27-336. With the exception of multifamily developments, no more than one (1) principal structure may be erected on each defined lot.

C.

Area and bulk regulations.

Density/ Min. Lot Size	Min. Lot Width at Bldg. Line	Max Lot Coverage	Minimum Street Frontage	Max Height
10 du per acre/10,500 s.f.	75 feet	60%	20 feet	35 feet (See 27-404(D))

 

Setbacks
Front	Side	Street Side/ Corner	Side/Rear Adjacent to RS district/development	Rear
30 feet	7.5 feet	15 feet	30 feet	10 feet

 

1.

Minimum building separation shall be ten (10) feet.

(Ord. No. 16-12, § 2, 2-21-12)