§ 27-411. Residential single-family high density (RS-4).

A.

Purpose. To provide very dense single-family detached housing as either new or infill development. The RS-4 zoning district is appropriate in higher density residential areas near the downtown, in mixed use/density areas, and as a transitional buffer zone between lower density residential development and multifamily or commercial uses. The RS-4 zoning district corresponds to the residential detached, mixed use residential, and mixed use employment classification of the master land use plan.

B.

Land uses. Permitted, conditional and accessory land uses in the RS-4 zoning district are identified on the land use matrix, article 27-400, appendix A. Specific land uses not identified on the matrix are subject to classification pursuant to section 27-336. No more than one (1) principal structure may be erected on each defined lot.

C.

Area and bulk regulations.

Density/ Min. Lot Size (s.f.)	Min. Lot Width at Bldg. Line	Max Lot Coverage	Minimum Street Frontage	Max Height
8.7 du per acre/5,000 s.f.	50 feet	65%	20 feet	35 feet(See 27.404(D))

 

Setbacks
Front	Side	Street Side/Corner	Rear
20 feet	5 feet	20 feet	10 feet

 

1.

Minimum building separation shall be ten ten (10) feet.

(Ord. No. 16-12, § 2, 2-21-12)