§ 27-410. Residential single-family medium/high density (RS-3).

A.

Purpose. To provide for medium-to-high density, compact single-family detached development on new sites or as infill construction. Adequate public services and facilities shall be available with sufficient capacity to serve the proposed development. This zoning district is intended to serve as a transition between the lower density single-family districts and the multifamily or commercial districts. RS-3 zoning is appropriate in urban and suburban areas and primarily applies to the residential detached, mixed use residential, and mixed use employment classification of the master land use plan.

B.

Land uses. Permitted, conditional and accessory land uses in the RS-3 district are identified on the land use matrix, article 27-400, appendix A. Specific land uses not identified on the matrix are subject to classification pursuant to section 27-336. No more than one (1) principal structure may be erected on each defined lot.

C.

Area and bulk regulations.

Density/ Min. Lot Size (s.f.)	Min. Lot Width at Bldg. Line	Max Lot Coverage	Minimum Street Frontage	Max Height
6.7 du per acre/6,500 s.f.	60 feet	60%	20 feet	35 feet(See 27.404(D))

 

Setbacks
Front	Side	Street Side/Corner	Rear
25 feet	7.5 feet	25 feet	10 feet

 

1.

Minimum building separation shall be ten (10) feet.

(Ord. No. 16-12, § 2, 2-21-12)